Béger, M.: |
Analysis of the parameters of the bearing steel heat treatment on the x-ray diffraction |
Bernadičová, Z.: |
Analysis of breaking reasons of spring plates discharging cheeks |
Bognerová, J.: |
Monitoring and modeling of the electrical conductivity of rubber mixtures in the process of cure |
Boor, S.: |
Analysis of a damaged cutting tool |
Budinský, M.: |
JE-Influence of long - term operation on changes of steel properties of primary circle of nuclear power stations |
Bútora, P.: |
Technology of rotational moulding of particle composite in polyetylene |
Cibuľa, M.: |
Diffusion boronizing hot work tool steel 1.2343 |
Červená, M.: |
Analysis of temperature fields by the high-frequency electric heating |
Čiernik, J.: |
Characteristics of the thermal injected coatings from basalt |
Dermek, P.: |
Materials Solution and Injection Mould Design |
Drgoň, M.: |
Analysis of surface hardening parts |
Drienovský, M.: |
Thermodynamics modeling phase equilibria in SAC lead-free solders |
Dubravický, P.: |
Modelling of phase equilibrium in alloys assigned for lead free solders |
Ďurčovič, K.: |
Influence of the construction of opened fillers from PVC profiles on their properties |
Eliášová, I.: |
Metallography of welded joints |
Florian, M.: |
Development of Oxide Layer on Hot-dip Zinc, Zinc-Aluminum and Zinc-Aluminum-Magnesium Coated Wire and its Effect on Properties |
Frkáňová, K.: |
Precipitation behaviour of 18Cr-18M1-2Mo-1N steel |
Grgač, D.: |
Analysis of the quality of hight strength railroad welded joint |
Halgaš, R.: |
Study and evaluation of boronizing tungsten-carbide dies |
Harnúšková, J.: |
Effect of production technology and heat treatment on mechanical properties of aluminium foams |
Haršány, T.: |
Influence of screw configuration on properties of PA and PP based composites |
Holub, A.: |
The comparison of sensitivity of selected methods NDT LT and their suitability in praxis |
Horváth, D.: |
The effect of the machined material on the tool's life of the exchangeable cutting tips |
Hoško, J.: |
Non-electrolytically applied zinc flake coatings |
Jakabovič, M.: |
The X-ray diffraction analysis ofthe heat treated tool steel X230CrVMo13 4 |
Jakubík, M.: |
Thermal stability of special glasses |
Javorský, M.: |
Aspects of realising a Zinc-Tin rotatable sputter target |
Jozefovič, P.: |
Influence of Heat Processing on the Leftover Tautness in Bearing Steel |
Kalvasterová, J.: |
Diffusion boronizing tool steel W300 for hot work |
Kocúrová, K.: |
Crack reason analysis of cover plate of clutch disk |
Kolář, M.: |
Analysis causes of damage piston in combusion engine |
Kolenčíková, M.: |
Cause analysis of the domage cogwheel |
Kresan, P.: |
Monitoring of the influence of rubber compounds based on styrene-butadiene on the process of vulcanization using elec |
Lipka, R.: |
Characterization of phases in complex metallic alloys Al73-Mn(27-x)-Fex (x=2,4 and 6) |
Lipovský, I.: |
Essay on adhesion of PA and PP based composites |
Maďar, P.: |
Structure and properties of zink layers on selected kind of steel |
Majkútová, E.: |
Influence of technological production steps on magnetic properties of nanocrystalline cores made of VITROPERM |
Maračeková, M.: |
Evaluation of the coloring polyethylene prepared by technology rotation molding |
Marcian, M.: |
Quality control of welded storage tank for fuel |
Merica, A.: |
Microstructure analyse welded joints of not alloyed steels |
Miškovičová, M.: |
Analysis of microstructure and surface fracture of heat-treated steel samples |
Mišovič, B.: |
Analysis of damage and wear of shear tools |
Mitický, P.: |
Valuation of properties electrographite for electroerosion machining |
Nagy, Š.: |
Study of microstructure and substructure of titanium alloy type Ti6A14V |
Nešťáková, M.: |
Inspection endoskopy systems in operation diagnostics technical equipments |
Ondrejka, T.: |
Microstructure analysis of shells for hand shoot gun |
Pargáč, M.: |
Analysess of defectives tools for press of metal |
Pašák, M.: |
Thermodynamic modelling of interdiffusion in Fe-Ni and Fe-Co bonds |
Pavlovičová, M.: |
X-ray diffractional analysis of heat-treated tool steel |
Pekara, P.: |
Diffusion boronising steel K390 Microclean |
Petrovičová, K.: |
Microstrucure analysis of rapidly solidified powders kind of NiCrSiB |
6Pišelyová, J.: |
The influence of hot isostatic parameters to the microstructure of K390 Microclean tool steel |
Polovka, M.: |
Evaluation of structure and properties of the constructional sections pressed from composite aluminium powders with additio |
Pribila, P.: |
Development of structure of particulate matter in roller compacting |
Psota, J.: |
Electric and dielectric properties of chosen chalcogenide glasses |
Roščák, L.: |
Aspects of interface layers for the realising of rotatable sputter targets |
Sloboda, R.: |
Analysis of damage surface electric contacts |
Staneková, H.: |
Phase analysis of nickel based hard-surfacing alloy |
Strašík, M.: |
Degrading of structural-mechanical properties of nodular cast iron type EN-GJS-700 by the temperature exposure |
Surkoš, S.: |
Influence of drawing technological parameters on microstructure of steel |
Šarmír, M.: |
Analysis of causes of premature destruction of valves in ship diesel |
Štefániková, M.: |
Precipitation behaviour of 17Cr-10Mn-3Mo-0.5N steel |
Šurka, Z.: |
Analysis of homogeneity and purity of the liquid alloy AlSi7Mg0,3 in the carrying furnace |
Tarics, I.: |
Analysis of tool steel S290 Microclean |
Tóth, M.: |
Blowing multilayer films of polyethylene |
Tóthová, A.: |
The influence of compound forming on rotational moulding of the filled polyethylene |
Vizváry, J.: |
The influence of heat treatment technological parameters on a microstructure of the bearing steel 85Mn3 |
Vrábová, Z.: |
Microstructural analysis of metallurgy blanks high speed steel |
Zmeková, L.: |
Aspects of realising a Zinc-Aluminium rotatable sputter target |
Žembová, D.: |
Evaluation of residual life of welded construction accordance to diagnostics methods |