Conferences year 2009

Conferences

[1]

AUGUSTIN, R., KOLEŇÁK, R., RUŽA, V.: High-temperature brazing of stainless steels. In: Zváranie 2009. Welding 2009 : : Slovenská zváračská spoločnosť, 2009. - ISBN 978-80-89296-09-5. - p. 223-228.

[2]

BABICOVÁ - KRŠIAKOVÁ, Ľ., BÍLIK, J.: Analysis of production technology of undercarriage part for automotive industry. In: International Doctoral Seminar 2009 : Proceedings.. - Trnava : AlumniPress, 2009. - ISBN 978-80-8096-088-9. - p. 420-426.

[3]

BALLA, J., KOLENIČ, F., KOVAŘÍKOVÁ (née SUKUBOVÁ), I.: Progress in weld deposits forming resistance against abrasion. In: INTERTRIBO 2009 : X. medzinárodné sympózium. : KONGRES management, 2009. - ISBN 978-80-89275-19-9. - p. 121-123.

[4]

BARÁNEK, I.: Hard turning and superfinishing. In: Moderní výrobní technologie pro 21.století. Modern Production Technologies for the 21st Century . Brno : Vysoké učení technické v Brně, 2009. - ISBN 978-80-214-3914-6. - p. 63-68.

[5]

BÁRTA, J., MARÔNEK, M.: Parameters proposal for CO2 laser welding of nitrooxidation treated steel sheets. In: International Doctoral Seminar 2009  AlumniPress, 2009. - ISBN 978-80-8096-088-9. - p. 13-19.

[6]

BENÁK, M., TARABA, B., TURŇA, MT.: Contribution to the computer modelling of explosion welding process. In: MicroCAD 2009 : Section L: Material Science and Material Processing Technologies. University of Miskolc, 2009. - ISBN 978-963-661-877-3. - p. 1-5.

[7]

BENÁK, M., BURANSKÝ, I., POCISKOVÁ DIMOVÁ, K.: Measurement of distortion in bimetal fabricated by explosion welding. In: International Doctoral Seminar 2009 .  Trnava : AlumniPress, 2009. - ISBN 978-80-8096-088-9. - p. 20-25.

[8]

BENÁK, M., NESVADBA, P., TURŇA, MT.: New knowledge on the welding on of CrNi austenitic steel to aluminium in solid state. In: Technológia zvárania 2009 : Trnava : AlumniPress, 2009. - ISBN 978-80-8096-102-2.

[9]

BENÁK, M., TRŠO, M., TURŇA, MT., NESVADBA, P.: Structural Stability of Composite Materials, Prepared by Explosion Welding, after their Heat Treatment. In: DSL 2009 : 5th International conference on diffusion in solids and liquids. 2009. - p. 361.

[10]

BENÁK, M., TURŇA, MT., PALČEK, P., NESVADBA, P.: Study of Explosion Welding of Mg Alloy with Aluminium. In: DSL 2009 : 5th International conference on diffusion in solids and liquids. 2009. - p. 362.

[11]

BEZNÁK, M., BAJČIČÁK, M., ŠUBA, R.: The main stages of technological cycle for low melting point alloys casting by tekcast method. In: Material science and manufacturing technology - MITECH 2009 . Česká zemědělská univerzita v Praze, 2009. - ISBN 978-80-213-1931-8. - p. 34-39.

[12]

BLAŠKOVITŠ, P., KOVAŘÍKOVÁ (née  SUKUBOVÁ), I., HODÚLOVÁ, E., SZEWCZYKOVÁ, B.: Properties of composite laser layers resistant against abrasion. In: INTERTRIBO 2009 .KONGRES management, 2009. - ISBN 978-80-89275-19-9. - p. 95-99.

[13]

CHAUS, A., RUDNICKII, F.: Diffusion and Secondary Carbide Precipitation in High-Speed Steels. In: DSL 2009 : 5th International conference on diffusion in solids and liquids. 2009. - p. 353.

[14]

CHAUS, A., BEZNÁK, M.: Diffusion in MC Carbides in High-Speed Steels during High-Temperature Treatments. In: DSL 2009 : 5th International conference on diffusion in solids and liquids. 2009. - p. 359.

[15]

CHAUS, A.: Advanced technologies and materials for cast cutting tools production. In: Technológia 2009 : Bratislava : STU v Bratislave, 2009. - ISBN 978-80-227-3135-5. - p. 3-7.

[16]

CHOVANEC, J., KRAXNER, J., ŠVANČÁREK, P., GALUSEK, D.: Optimisation of alumina water suspensions for tape casting. In: Proceedings of VIIIth International Conference "Preparation of Ceramic Materials".: Technical University of Košice, 2009. - ISBN 978-80-553-0208-9. - p. 49-54.

[17]

DEMIANOVÁ, K., POCISKOVÁ DIMOVÁ, K.: Brazing of solar collectors. In: ELITECH `09 : Bratislava : STU v Bratislave FEI, 2009. - ISBN 978-80-227-3091-4. - p. 1-4.

[18]

DEMIANOVÁ, K., ONDRUŠKA, J., TURŇA, MT.: Inductive heating in technological processes of metallurgic metal joining. In: Technológia zvárania 2009 : Trnava : AlumniPress, 2009. - ISBN 978-80-8096-102-2.

[19]

DEMIANOVÁ, K., POCISKOVÁ DIMOVÁ, K., TURŇA, MT.: Welding, surfacing and brazing of metal by induction heating. In: Zváranie 2009. Welding 2009 : Bratislava : Slovenská zváračská spoločnosť, 2009. - ISBN 978-80-89296-09-5. - p. 217-222.

[20]

ELEKOVÁ, Ľ., GÖRÖG, A.: Mathematic formulation of material rate profile curve via a polynomial. In: Novus Scientia 2009 : Technická univerzita v Košiciach, 2009. - ISBN 978-80-553-0305-5. - p. 215-224

[21]

GAJDZICA, T., KOTAS, B., KOTAS, M., ČMIEL, K., SCHINDLER, I., KLIBER, J., TITTEL, V.: The controlled cooling simulation of a case - hardening steel rolled into coils. In: METAL 2009 : Slezká Ostrava : Tanger, 2009. - ISBN 978-80-87294-03-1.

[22]

GÖRÖG, A., BURANSKÝ, I.: Influence of milling strategies for roundness. In: RaDMI 2009 Volume 1. - Vrnjačka Banja : SaTCIP, 2009. - ISBN 978-86-6075-007-7. - p. 206-211.

[23]

GÖRÖG, A., MALÍK, A.: Comparison of the measurement methods of a circularity deviationsi. In: Novus Scientia 2009 : Košice : Technická univerzita v Košiciach, 2009. - ISBN 978-80-553-0305-5. - p. 689-693

[24]

GÖRÖG, A., MARAČEKOVÁ, M.: Influence of holding on a circularity deviation by pipe turning. In: Novus Scientia 2009 : Košice : Technická univerzita v Košiciach, 2009. - ISBN 978-80-553-0305-5. - p. 694-700

[25]

HODÚLOVÁ, E., LECHOVIČ, E., SZEWCZYKOVÁ, B., ULRICH, K.: Transformation of leadless part with automatisation process. In: Robotizacija i automatizacija u zavarivanju i ostalim tehnikama : The 5th International scientific-professional conference SBW 2009. Slavonski Brod : Strojarski fakultet u Slavonskom Brodu, 2009. - ISBN 978-953-6048-51-9. - p. 153-160

[26]

JASENÁK, J., CÍFERSKÝ, T., MEČIAR, S.: Fixing of failures of forming press by welding. In: Národné fórum údržby 2009 Žilina : Žilinská univerzita, 2009. - ISBN 978-80-554-0018-1. - p. 252-260.

[27]

JASENÁK, J., CÍFERSKÝ, T.: Submerged arc welding of pressure vessels parts. In: Zváranie 2009. Welding 2009 : Bratislava : Slovenská zváračská spoločnosť, 2009. - ISBN 978-80-89296-09-5. - p. 246-249.

[28]

KNOŠKO, P.: Numerical prediction of abrasion by a dry friction via the modified Archard equation. In: INTERTRIBO 2009 : KONGRES management, 2009. - ISBN 978-80-89275-19-9. - p. 21-24.

[29]

KRAKOVSKÝ, F.: Influence of oxidation parameters on the wetting power of adhesives. In: Novus Scientia 2009 : Košice : Technická univerzita v Košiciach, 2009. - ISBN 978-80-553-0305-5. - p. 538-541

[30]

LECHOVIČ, E., SZEWCZYKOVÁ, B., ULRICH, K.: Influence of Bi on the microstructure evolution of solder joints in micro-electronics. In: METAL 2009 : Slezká Ostrava : Tanger, 2009. - ISBN 978-80-87294-03-1.

[31]

LÍŠKA, J.: Present situation of machining composite materials in the company. In: International Doctoral Seminar 2009 : Trnava : AlumniPress, 2009. - ISBN 978-80-8096-088-9. - p. 382-390.

[32]

MARÔNEK, M., BÁRTA, J., DOMÁNKOVÁ, M., ULRICH, K., KOLENIČ, F.: Electron Beam Welding of Steel Sheets Treated by Nitro-oxidation. In: The 62nd Annual Assembly and International Conference of the International Institute of Welding (IIW) :. - Singapore, 2009. - p. 1-11.

[33]

MARÔNEK, M., BÁRTA, J., DOMÁNKOVÁ, M., HODÚLOVÁ, E.: Microstructural analysis of nitrooxidation treated steel sheets. In: Advanced metal materials and technologies 2009 (AMMT`2009) St. Petersburg : Izdateľstvo Politechničeskogo universiteta, 2009. - ISBN 978-5-7422-2308-5.

[34]

MOROVIČ, L.: Possibilities of optical 3D digitizing. In: 8th YSESM : Budapešť : Scientific Society of Mechanical Engineers, 2009. - ISBN 978-963-9058-26-2. - p. 38-39.

[35]

MURGAŠ, M., POKUSOVÁ, M.: Effect of mould mixture`s thermo-physical properties on crystallization of ductile cast iron. Ostrava : VŠB - TU Ostrava, 2009. - ISBN 978-80-248-2056-9.)

[36]

NESVADBA, P., BENÁK, M., BELKO, J., TURŇA, MT.: Explosion firming of metals.  In: Technológia zvárania 2009 : - Trnava : AlumniPress, 2009. - ISBN 978-80-8096-102-2.

[37]

OMÁMIK, M.: Evaluation of production quality of shaped surfaces by milling. In: CIM 2009. Computer integrated manufacturing and high speed machining : - Zagreb : Croatian Association of Production Engineering, 2009. - ISBN 978-953-7689-00-1. - p. 153-162

[38]

OMÁMIK, M.: Qualitative properties of milled free form surfaces. In: International Doctoral Seminar 2009 Trnava : AlumniPress, 2009. - ISBN 978-80-8096-088-9. - p. 229-240.

[39]

ONDRUŠKA, J., NESVADBA, P., TURŇA, MT.: Study of the range of the bimetals Sn - other metal materials. In: Technológia zvárania 2009 : Trnava : AlumniPress, 2009. - ISBN 978-80-8096-102-2.

[40]

ONDRUŠKA, M.: Life cycle of electrodes by seam electric resistance welding. In: SEMDOK 2009 : Žilina : Žilinská univerzita, 2009. - ISBN 978-80-8070-959-4. - p. 86-90

[41]

ONDRUŠKA, M.: Life cycle of wheel electrodes by seam electric welding. In: Súčasný stav odporového zvárania Bratislava : Slovenská zváračská spoločnosť, 2009. - ISBN 978-80-89296-06-4. - p. 44-50.

[42]

PETERKA, J., POKORNÝ, P.: Link CAQ to the important CA systems. In: RaDMI 2009 : " Volume 1. - Vrnjačka Banja : SaTCIP, 2009. - ISBN 978-86-6075-007-7. - p. 620-625.

[43]

PETERKA, J., POKORNÝ, P.: Surface accuracy and surface roughness in dependency on CAM strategies. In: CIM 2009. Computer integrated manufacturing and high speed machining : - Zagreb : Croatian Association of Production Engineering, 2009. - ISBN 978-953-7689-00-1. - p. 177-180.

[44]

POCISKOVÁ DIMOVÁ, K.: Research of welding property of high-alloy steels with laser. In: SEMDOK 2009 : Žilina : Žilinská univerzita, 2009. - ISBN 978-80-8070-959-4. - p. 95-98.

[45]

POCISKOVÁ DIMOVÁ, K., CHRIAŠTEĽOVÁ, J., RÍZEKOVÁ TRNKOVÁ, L., OŽVOLD, M., TURŇA, MT.: Forming of the intermetalic phases on the range of the liquid solder - substrate. In: Technológia zvárania 2009 : Trnava : AlumniPress, 2009. - ISBN 978-80-8096-102-2.

[46]

PODHORSKÝ, Š., GÖRÖG, A.: The limitation of the surface roughness at plasma polishing. In: Material science and manufacturing technology - MITECH 2009 :Česká zemědělská univerzita v Praze, 2009. - ISBN 978-80-213-1931-8. - p. 249-254.

[47]

POKUSOVÁ, M., MURGAŠ, M.: Using the modulus at optimizing of ductile cast iron chemical composition. Ostrava : VŠB - TU Ostrava, 2009. - ISBN 978-80-248-2056-9.

[48]

POLAKOVIČ, M., PETERKA, J.: Simulation algorithm of milling based on models of cutting force, tool deflection and surface roughness. In: RaDMI 2009 : Volume 1. - Vrnjačka Banja : SaTCIP, 2009. - ISBN 978-86-6075-007-7. - p. 306-311.

[49]

POLAKOVIČ, M.: SUB - Models of tool deflection and cutting forces in roughness simulation using ball nose end mill model. In: Automation in Production Planning and Manufacturing : Žilina : Vedeckotechnická spoločnosť pri Žilinskej univerzite, 2009. - ISBN 978-80-554-0008-2. - p. 219-224.

[50]

POLAKOVIČ, M., PETERKA, J.: Surface roughness simulation based on voxels. In: RaDMI 2009 : Volume 1. - Vrnjačka Banja : SaTCIP, 2009. - ISBN 978-86-6075-007-7. - p. 312-317.

[51]

RAFALSKI, I., ARABEY, A., LUSHCHIK, P., CHAUS, A.: Computer modeling of cast alloys solidification by computer-aided cooling curve analysis (CA-CCA). In: International Doctoral Seminar 2009 : Trnava : AlumniPress, 2009. - ISBN 978-80-8096-088-9. - p. 291-301.

[52]

SCHWARZ, L., KOVAŘÍKOVÁ (née SUKUBOVÁ), I., KOLENIČ, F., ULRICH, K.: Creation of surface layers with a laser by an over-laying process using added material in a form of wire. In: 13. seminár ESAB : - Bratislava : Slovenská zváračská spoločnosť, 2009. - ISBN 978-80-89296-07-1. - p. 26-33.

[53]

SIKETOVÁ, K.: Free-form surface characteristics. In: International Doctoral Seminar 2009 : Trnava : AlumniPress, 2009. - ISBN 978-80-8096-088-9. - p. 391-397.

[54]

ŠIMEK, M., DŘÍMAL, D., KOLENIČ, F.: Laser connection of material combination of graphite alloy and stainless steel. In: Technológia zvárania 2009 : Trnava : AlumniPress, 2009. - ISBN 978-80-8096-102-2.

[55]

ŠOLOPOVÁ, Z.: Technical solution application of the lubrication systems in semi-automation assembly lines. In: INTERTRIBO 2009 : Stará Lesná / Tatranská Lomnica. - : KONGRES management, 2009. - ISBN 978-80-89275-19-9. - p. 25-28.

[56]

ŠVANČÁREK, P., LENDVAYOVÁ, S., GALUSEK, D., CHOVANEC, J.: Abrasive wear resistance of hot-pressed alumina with SiO2 addition and various grain size : Košice : Technical University of Košice, 2009. - ISBN 978-80-553-0208-9. - p. 146 - 147.

[57]

SZEWCZYKOVÁ, B., ŠIMEK, M.: Study of laser layers resistant against abrasive wear. In: Zváranie 2009. Welding 2009 .Bratislava : Slovenská zváračská spoločnosť, 2009. - ISBN 978-80-89296-09-5. - p. 211-216.

[58]

TRŠO, M., DEMIANOVÁ, K.: Metallurgical solid state bonding of combined metals. In: International Doctoral Seminar 2009 : Trnava : AlumniPress, 2009. - ISBN 978-80-8096-088-9. - p. 349-354

[59]

TURŇA, Ľ., LOKAJ, J., TURŇA, MT., NOVÁK, M.: Optimalisation of the geometric configuration of a solar collector. In: Power Engineering - Ecology - Economy : Bratislava : STU v Bratislave, 2009. - ISBN 978-80-89402-08-3. - p. 1-10.

[60]

TURŇA, MT., NESVADBA, P., BENÁK, M., ONDRUŠKA, J.: The new knowledge about explosion welding of combined materials. In: Zváranie 2009. Welding 2009 : Bratislava : Slovenská zváračská spoločnosť, 2009. - ISBN 978-80-89296-09-5. - p. 130-135.

[61]

TURŇA, MT., KOVAČÓCY, P., SAHUL, M.: Welding of special steels by Disc and CO2 laser. In: Zváranie 2009. Welding 2009 : Bratislava : Slovenská zváračská spoločnosť, 2009. - ISBN 978-80-89296-09-5. - p. 68-74.